Extreme Duty Roll Bar Brackets
Extreme Duty Roll Bar Brackets
Extreme Duty Roll Bar Brackets
Extreme Duty Roll Bar Brackets

H3R Performance

Extreme Duty Roll Bar Brackets

$85.00
Select your Fire Extinguisher Size (sold separately):2.5 lb.
Select Roll Bar Size:1-5/8" Roll Bar
Quantity:
Pickup available at H3R Performance Headquarters Usually ready in 2 hours

Extreme Duty Roll Bar Brackets

2.5 lb. / 1-5/8" Roll Bar

H3R Performance Headquarters

Pickup available, usually ready in 2 hours

103 H St
Petaluma CA 94952
United States

+14159450800

Speed is critical when deploying a fire extinguisher. Count on our patented Extreme Duty quick release fire extinguisher bracket to allow fast action while withstanding rigorous use. Made for extreme duty, it offers an exceptional mounting solution for off road and racing enthusiasts.

Note: This bracket is designed to fit H3R Performance fire extinguishers. It may not fit extinguishers produced by other manufacturers.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Tough, Functional & Lightweight

  • Roll bar mounts available for 1⅝ and 1¾ inch roll bar diameters.
  • Designed to meet MIL-STD-810G
  • Designed to withstand inertia loads in excess of 27G
  • Fire extinguisher quickly releases from bracket
  • Fire extinguisher cannot be accidentally disengaged from bracket
  • Pull-to-release flag enhances visibility
  • Fiberglass reinforced nylon construction
  • Corrosion resistant hardware
  • Does not obscure fire extinguisher nameplate
  • One year limited warranty
*Fire extinguisher sold separately

DISCLAIMER: Always have a qualified professional install and/or inspect installation of this product. H3R Performance, Inc. accepts no responsibility for the use, misuse or installation of this product.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Rob
They deserve your business!

I bought a fire extinguisher bracket from H3R Performance for installing one on my roll bar for the recently completed RSD.

It came and I was impressed with the construction and the instructions. I read the instructions and very clearly they said, "don't over-tighten". Well with the small screws and lock nuts it was a little hard to tell how tight they were getting and of course I broke one of the brackets.

I emailed the company to see if I could buy just that part as there was no issue with the product, but was obviously a case of operator error.

I received a reply, [on a Sunday no less] and was asked to send a photo of the damaged part so they were sure of which to send which I did.
On Wednesday I received the replacement part, plus a new set of screws, PLUS a bag of gummy bears! Free of charge!

Then I realized the person that replied to my email was the vice-president of the company!

Now that's the way to run a company! A big thanks to H3R Performance and please check them out if you need anything along those lines.

"Originally posted on North American Motoring Forum."